Projects‎ > ‎Jayco 806SD Deluxe‎ > ‎

12v Power system

I made this into a 2 12v busses, each bus can easily handle 100A and is fused.

This is 2ga jumper cable as it was by far the cheapest I could find for such a cable. box is a low voltage "old work" box that clamps from the rear.

This is the only way i could think of to make all the connection solid. 12ga to each anderson power pole.

Note the holes besides the screws.  These were drilled to add the weather cover.
I used a blank cover over this cover and aligned them to mark said holes.

GFCI weather cover over that plate.


Comments